I tried recently to connect an Andor sCMOS Zyla4.2 under Micromanager
This camera was already installed and running well under NIS Elements 5.02
on the computer.
I installed the latest release of Andor SKD3 3.13.30034 without updating the
Bit Flow version that was already installed...
I'm trying to install Micromanager for our microscope. We have a Nikon Ti, Andor Camera, Andor Frappa, Andor laser combiner, Lambda shutter/filter wheel and a Yokogawa CSUX. Most of it works fine but the Andor laser combiner is a problem. During the configuration a fault message comes...
I am trying to get an Andor Zyla sCMOS camera setup with Micromanager. When I go through the Hardware configuration wizard I get the "DeviceCreate function failed" error when I try to add the "Andor sCMOS Camera" from the AndorSDK3.
I have followed the directions in the AndorSDK3...
I am trying to control my Andor camera via Matlab; however, when I set my Camera device (mmc.setCameraDevice('Andor')) and try to take a picture (mmc.snapImage()) I get an error saying.....
Java exception occurred:
java.lang.Exception: Error in device Andor: Error code 20013 (4e2d hex).
Hi Micromanager community:
I have been trying to set up andor zyla 5.5 with micromanager,it was
working well, but then suddenly it stopped working. What happens is if I
try to build a new configuration and add the andor sdk3, micromanager
crashes. I have tried reloading the andor dll files...
You need to add both cameras when you're setting up your hardware configuration. This will initialise both cameras.
There is a plugin called "Multi-Andor Control" which will let you switch between the iXon and Clara as your active camera, which will let you acquire from either.
I hope this meets your requirements.
3rd Party Support
there are two minor problems, that prevent compilation
of the Andor DeviceAdapter on Linux in a recent Micromanager 1.3 check out.
MAX_PATH and stricmp are not defined.
I fixed this by adding the two lines:
#define stricmp strcasecmp
#define MAX_PATH 128
to the top of the file...
I just received my Andor Neo sCMOS camera and have been trying to get it to work with MM.
I have the latest stable MM (1.4.7) for my 64bit computer with intel i7 processor.
I have installed the SDK3 package from Andor and I am able to run the test examples provided with that package...
... Andor sCMOS Camera from adapter module ANDOR SDK3".
I have seen a similar thread a while ago and the solution was apparently to upgrade MM and/or ANDOR drivers. Here, I am using the latest MM version 1.4.22 and ANDOR sCMOS pack version 3.11.30050.0. Hence I am wondering if a similar issue exists...
I am having a problem installing Andor Clara (as part of a TiE
system). I have copied the new atmcd32d (version 2.87) to the
Still, when adding the "Andor Camera" on on a fresh configuration, I
get error code 22, Andor error code 20006.
I thought perhaps MM doesn't...
We currently have an Andor Neo sCMOS camera for testing and MicroManager
support is certainly important. I can't get MM to recognize the camera,
so does the MicroManager Andor driver support the Andor Neo? If not, would
it further that support if one could get the Neo SDK to...
Does anyone know if/when/how difficult it would be to get micromanager to work with an Andor Ikon M Camera? It seems as if almost all of Andors cameras are supported except this one. I don't need it to do much, just run a kinetic series and acquire multiple images at a time. No analysis, no...