I have an Axiovert 200M with two cameras, an Axiocam MRc5 and an Axiocam
I managed to configure the entire system except for the MRc5. I am able to
successfully control the microscope stand components along with the MRm (I
can take images). The MRm connects over what appears to...
I'm planning to use the AxioCam ERc5s with MM using Windows 10. So far I get the error "camera not found" when choosing AxioCam through the Configuration Wizard. Doesn't MM support the ERc5s, or is there a way around?
I am thinking about using Micro-Manager to control our AxioObserver Microscope from Zeiss, there are two AxioCam Mrm Cameras attached that I would have to control simultaneously. Is that possible? I didn't find the AxioCams under the supported Hardware on the Micro-Manager Wiki.
Is Micro-Manager working on supporting the AxioCam HSm, or has anyone been able to acquire from an AxioCam HSm with Micro-Manager? I've had no luck with nightly builds or with a generic IEEE bus driver. The camera works fine with AxioVision 4.6, but does not recognize with Micro-Manager...
I know that support for the AxioCamMR has been added up to revision 3 cameras, can/will this be extended to the AxioCam MRc5 ?
I have this camera connected to my computer and I can connect fine using the AxioVision software, but adding the device in the Micromanager (v1.4.13) Hardware dialog crashes the program.
This is the logfile for the crash:
This is the logfile for micromanager:
Similar to others, I am unable to configure Micro-Manager with my AxioCam HRc connected by Firewire cable. The Windows device is enable and the camera works with the Axiovision software. When I try to add this camera, the program crashes. Has anyone figured out how to make this work?
Zeiss have new Axiocam 503 which is better than MRm, but its USB 3.0. Is
there any way AxioCam 503 might work with MicroManager?
Nick Malinowski, PhD
micro-manager-general mailing list
On Thu, May 28, 2015 at 1:52 PM, Mikalai Malinouski
> Zeiss have new Axiocam 503 which is better than MRm, but its USB 3.0. Is
> there any way AxioCam 503 might work with MicroManager?
Please see my previous post:
On Tue, Jul 08, 2014 at 09:06:33PM +0000, Hagen, Brian wrote:
> Is Micro-Manager working on supporting the AxioCam HSm, or has anyone
> been able to acquire from an AxioCam HSm with Micro-Manager? I've had
> no luck with nightly builds or with a generic IEEE bus driver. The...
Any update regarding Axiocam 503 drivers for µ-manager?
... periodically tried to get
some traction with the important players at Zeiss, but so far, he has come
up empty. His prior comments indicate that Zeiss Axiocam is the most
requested unsupported Micromanager Device.
His typical advice to us has been, that if we know anyone important Zeiss
I made a second test with the AxioCam MRc and the Python interface.
Like i wrote in the previous Mail: the camera works fine with
Micro-Manager but when it comes to the Python interface I'm getting
some errors that I don't fully understand. I managed to enable further